The step called "post-installation" is actually the initial configuration of YunoHost. It has to be done just after the installation of the system itself.
From the web interface
You can perform the post-installation with the web interface by entering in your browser :
* the local IP address of your server if it is on your local network (e.g. at home !). The address typically looks like
192.168.x.y (see 'Find your IP' on the page about SSH)
* the public IP address of your server if your server is not on your local network. Typically, if you own a VPS, your VPS provider should have gave you the IP of the server.
During the first visit, you will very likely encounter a security warning related to the certificate used by the server. For now, your server uses a self-signed certificate. You will later be able to add a certificate automatically recognized by web browsers as described in the certificate documentation. For now, you should add a security exception to accept the current certificate.
You should then land on this page :
Preview of the Web post-installation
From the command line
You can also perform the postinstallation with the command
yunohost tools postinstall directly on the server, or via SSH.
Preview of the command-line post-installation
This is the first domain name linked to your YunoHost server, but also the one which will be used by your server's users to access the authentication portal. It will thus be visible by everyone, choose it wisely.
If you do not have a domain name, or if you want to use the YunoHost's DynDNS service, choose a sub-domain of .nohost.me or .noho.st (e.g.
homersimpson.nohost.me). The domain will be configured automatically and you won't need any further configuration step.
If you do know what DNS is, you probably want to configure your own domain name here. In this case, please refer to the DNS page page for more informations.
If you don't own a domain name and don't want a .nohost.me or .noho.st, you can use a local domain. The idea is to configure your router to redirect a local domain name to your server. For example you could create the yunohost.local domain redirecting to your server in your router, and now every device on the network will be redirected to your server when accessing yunohost.local. More information on how to setup a local domain can be found here.
If you got so far and saw 'YunoHost has been successfully installed' (web postinstall) or 'YunoHost has been correctly configured', then congratulations!
What now ?
- If you're self-hosting at home and without a VPN, you need to make sure to correctly forward ports on your router/Internet box ;
- If you're using your own domain name (i.e. not a .nohost.me / .noho.st), you need to configure it according to the recommended DNS configuration ;
- If you cannot configure your domain name yet (because you didn't register it yet, or because this is a test domain), see last paragraph here for a workaround ;
- Don't be too afraid of the certificate warning, you'll probably be able to install a Let's Encrypt certificate :).
- Have a look at the available apps !