Установка YunoHost

Выберите оборудование, на которое вы хотите установить YunoHost :

Предварительные условия

  • Плата ARM с объемом оперативной памяти не менее 512 МБ

    *Источник питания (либо адаптер, либо кабель microUSB) для вашей платы;

  • Карта microSD: емкость 16 ГБ (не менее), класса "A1" настоятельно рекомендуется (например, эта SanDisk A1 карта);
  • хороший Интернет-провайдер, предпочтительно с хорошей и неограниченной восходящей полосой пропускания
  • Кабель Ethernet (RJ-45) для подключения вашего сервера к маршрутизатору.
  • Компьютер, чтобы прочитать это руководство, прошейте изображение и получите доступ к вашему серверу.
  • Download the Armbian image

    Download the image for your board on Armbian's website

    N.B.: you should download the image Armbian Bullseye.

    If you wish to check the validity of our signed images, you can download our public key.

    microSD card with adapter Flash the Armbian image

    Now that you downloaded the image of Armbian, you should flash it on a microSD card

    Download Etcher for your operating system and install it.

    Plug your SD card, select your image and click "Flash"

    Etcher

    Power up the board

    • Plug the ethernet cable (one side on your main router, the other on your board).
      • For advanced users willing to configure the board to connect to WiFi instead, see for example here.
    • Plug the SD card in your board
    • (Optional) You can connect a screen+keyboard directly on your board if you want to troubleshoot the boot process or if you're more comfortable to "see what happens" or want a direct access to the board.
    • Power up the board
    • Wait a couple minutes while the board autoconfigure itself during the first boot
    • Make sure that your computer (desktop/laptop) is connected to the same local network (i.e. same internet box) as your server.

    Connect to the board

    Next you need to find the local IP address of your server to connect as root user via SSH with the temporary password 1234.

    ssh root@192.168.x.xxx

    Run the install script

    • Open a command line prompt on your server (either directly or through SSH)
    • Make sure you are root (or type sudo -i to become root)
    • Run the following command:
    curl https://install.yunohost.org | bash

    If curl is not installed on your system, you might need to install it with apt install curl. Otherwise, if the command does not do anything, you might want to apt install ca-certificates

    Note for advanced users concerned with the curl|bash approach: consider reading "Is curl|bash insecure?" on Sandstom's blog, and possibly this discussion on Hacker News.

    Proceed with the initial configuration

    If you are in the process of restoring a server using a YunoHost backup, you should skip this step and instead restore the backup instead of the postinstall step.

    In an internet browser, type https://yunohost.local (or yunohost-2.local, and so on if multiple YunoHost servers are on your network).

    If this doesn't work, you can look for the the local IP address of your server. The address typically looks like 192.168.x.y, and you should therefore type https://192.168.x.y in your browser's address bar.

    During the first visit, you will very likely encounter a security warning related to the certificate used by the server. For now, your server uses a self-signed certificate. You will later be able to add a certificate automatically recognized by web browsers as described in the certificate documentation. For now, you should add a security exception to accept the current certificate. (Though, PLEASE, do not take the habit of blindly accepting this kind of security alert!)

    You should then land on this page :

    Initial configuration page

    Preview of the Web initial configuration page
    Main domain

    This will be the domain used by your server's users to access the authentication portal. You can later add other domains, and change which one is the main domain if needed.

    • If you're new to self-hosting and do not already have a domain name, we recommend using a .nohost.me / .noho.st / .ynh.fr (e.g. homersimpson.nohost.me). Provided that it's not already taken, the domain will be configured automatically and you won't need any further configuration step. Please note that the downside is that you won't have full-control over the DNS configuration.

    • If you already own a domain name, you probably want to use it here. You will later need to configure DNS records as explained here.

    Yes, you have to configure a domain name. If you don't have any domain name and don't want a .nohost.me / .noho.st / .ynh.fr either, you can set up a dummy domain such as yolo.test and tweak your local /etc/hosts file such that this dummy domain points to the appropriate IP, as explained here.

    First user

    Since YunoHost 11.1, the first user is now created at this stage. You should pick a username and a reasonably complex password. (We cannot stress enough that the password should be robust!) This user will be added to the Admins group, and will therefore be able to access the user portal, the web admin interface, and connect via SSH or SFTP. Admins will also receive emails sent to root@yourdomain.tld and admin@yourdomain.tld : these emails may be used to send technical informations or alerts. You can later add additional users, which you can also add to the Admins group.

    This user replaces the old admin user, which some old documentation page may still refer to. In which case : just replace admin with your username.

    Run the initial diagnosis

    Once the postinstall is done, you should be able to actually log in the web admin interface using the credentials of the first user you just created.

    The diagnosis system is meant to provide an easy way to validate that all critical aspects of your server are properly configured - and guide you in how to fix issues. The diagnosis will run twice a day and send an alert if issues are detected.

    N.B. : don't run away ! The first time you run the diagnosis, it is quite expected to see a bunch of yellow/red alerts because you typically need to configure DNS records (if not using a .nohost.me/noho.st/ynh.fr domain), add a swapfile if not enough ram and/or port forwarding.

    If an alert is not relevant (for example because you don't intend on using a specific feature), it is perfectly fine to flag the issue as 'ignored' by going in the webadmin > Diagnosis, and clicking the ignore button for this specifc issue.

    To run a diagnosis, go on Web Admin in the Diagnosis section. Click Run initial diagnosis and you should get a screen like this :

    Preview of the diagnostic panel

    Get a Let's Encrypt certificate

    Once you configured DNS records and port forwarding (if needed), you should be able to install a Let's Encrypt certificate. This will get rid of the spooky security warning from earlier for new visitors.

    For more detailed instructions, or to lean more about SSL/TLS certificates, see the corresponding page here.

    Go in Domains > Click on your domain > SSL Certificate

    Preview of the diagnostic panel

    Congratz!

    You now have a pretty well configured server. If you're new to YunoHost, we recommend to have a look at the guided tour. You should also be able to install your favourite applications. Don't forget to plan backups !

    Нашли ошибки? Думаете, что можете улучшить документацию? Simply click the Edit link at the top of the page, and then the icon on Github to suggest changes.